Century Roofing

A Trusted Roofing Contractor

Steep Slope Roofing

Steep slope roofing materials that are well suited for high slopes.

Single System

The single system roof is designed to be installed in one layer. It has good flexibility and resistance.


We have a separate installation team that does the work flawlessly.


Century roofing provides their customers with unparalleled services.

Green Roofing

Green sustainable roofing involves creating a small-scale garden on top of your roof, helping to convert CO2 into oxygen, supply your family with fresh locally grown food, utilize all available space on your property, and send an immediate and totally unique message every time someone passes by your home.

featured projects

Shingle Roofing

Shingle roofing is made up of three layers: an asphalt base, fiberglass mat, and a thin layer of finely ground minerals for sheen and additional protection.

Slate Roofing

Slate roofing has a long and storied history in the Northeastern portion of the United States and most historic and older buildings in the region have immaculately maintained slate roofing.

Spanish Tile

Made of clay, the tiles can be found in both red and a burnt orange, and more exotic colors such as purple and blue are available upon special order (although these are not considered to officially be “Spanish tile roofing”).

Single Ply Roofs

A single ply system is a thin, flexible roofing membrane that is rolled out onto a roof and held in place through adhesives or a mechanical device.

Sheet Metal

This type of roofing also lasts a long-time, with minimal change in its aesthetic appearance and last up to 100 years.

Church Roofing

If you have never been required to perform a major renovation or build a church from the ground up

Municipal Roofing

municipal roofing projects are varied and can include slate, ceramic, single-ply roofing, composite materials, sheet metal, or even green roofing systems.

Preconstruction Planning

Commercial roofs typically include many features not found on residential roofs, such as extensive exhaust systems, industrial-strength insulation, large air conditioners and other electrical equipment, and are usually built with the expectation that they will have consistent foot traffic.

Industrial Roofing Systems

Commercial and industrial roofing differs from residential roofing in several key ways: the slope of the roof itself, the materials used, the structures placed on the top of the roof, and the level of expertise required to accurately construct industrial roofing.

Recent Posts

Importance of Gutters to Your Roofing System

Importance of Gutters to Your Roofing System

Most property owners tend to focus more on their roofing system while neglecting other components found on their roof. Apart from your roofs, one of the components on your property that should be checked and maintained regularly is the gutter. You gutter serves more than the catch basin of rainwater. The gutter system also aids in the preservation and protection of your property, especially against water damages.

Here in Seattle, Washington, rain, and snow are the primary elements why properties, such as your home experience, water damages. Apart from the roof punctures, the malfunctioning gutter system also aids in such issue. When it rains or when snow melts and the gutter is blocked with various debris, it will cause for the water to find another path. And in most cases, apart from directly affecting the foundation of your property, unchecked gutters could also cause for water to seep through the roofing of your home.

That is why it is important that you should always care for your gutter system. Here in Washington area, roofing contractors like Eco Home Service & Roofing, highly suggest that gutter care and maintenance should not be neglected. And here below are some of the suggestions and tips you may follow.

gutter installation in progress

Inspect Gutters

The first thing you should do in order to safeguard your gutter system and continue its proper functioning is to inspect it thoroughly. When inspecting your gutters, you should check for loose, bent, or missing gutter hangers, some corrosion, and most especially for debris. These factors affect the proper functioning of your gutter system.

Clean Your Gutter

When you notice that your gutter is riddled with leaves, dust, and other debris, you should commence gutter cleaning. In order for the water to flow towards proper drainage, its path should not be obstructed by debris. For that matter, you should take time to remove that debris. This will not only avoid waterspouts, but it will also prevent your gutters from being too heavy that its hangers will not be able to take hold of it.

Look for Leaks

After you have removed the debris on your gutters, you should now look for potential leaks. With the help of a garden hose, try to flush the remaining residue or debris. Allow the water to move freely and check which portion of the gutter that leaks are visibly present. If you will not take care of a gutter leak, you will find yourself with having to spend more money for the replacement of exterior components than that of the price you should have paid to repair the leak on its very first manifestation.

Check Drainage

Another aspect through which you may be able to improve the function of your gutter system is its drainage. The gutter itself is just a channel, and its directed toward the drainage. However, if the drainage is not properly functioning, similar to your gutter, chances are high that water will definitely find another escape route. And such an escape route may include your internal roofing. Hence, causing more damage and deterioration.

Trim Down Plants

The most common cause of debris on the gutters are the trees and its leaves. That is why if you wanted to remove the main cause of the problem, you should at least trim the trees so as to mitigate the impact of debris on your gutter system. This is especially true when the autumn season is about to begin.

Consider Replacement

Another aspect of gutter care that should be considered, is the replacement of the gutters. When you think that your gutters are beyond repair or maintenance, you should consider replacing it with new and more durable gutters. This will not only improve the flow of water, but it will also improve the aesthetics of your roofing system.

Ask Some Help

When dealing with your gutters, it can be very tempting to have a DIY project. However, you should understand that gutter system and its problems can be complicated as your roofing system. That is why it is of great importance that you should ask the help of a professional roofing contractor that specialize also in gutter services, including installation, repair, and replacement.


One of the reasons why you should contact a professional roofer is because they have the experience and tools to remedy your problem with your gutter system. Apart from that, the specialized roofing knowledge of these contractors can easily be applied even if the gutter is the only thing that you have noticed to be poorly performing. When they would be checking for some issues on your roof, inevitably other roofing problems that escaped your attention will be reported to you. Thus avoiding other costly damages to your property as a whole.


Top Roofing Materials For Houses

  1. Asphalt Roof Shingles –

This is the Number one rooftop material introduced in homes all over the US. Normal establishment cost is around  $4,500-7,500. Shingles are so fiercely mainstream since they are the most conservative alternative, with the best assortment of hues and styles. Top makers to consider are GAF, Certainteed, Owens Corning and IKO. The greatest drawback is that they are inclined to spills, are not impervious to snow and ice dams, are vulnerable to twist pass over, and will in general blur after some time. By and large, these rooftops can last 10-16 years, and significantly less on the off chance that they are not appropriately installed.

  1. Metal Roofing –

Lately, metal rooftops have been relentlessly picking up prevalence among households, who are understanding its gigantic esteem. While it is a top-notch rooftop, it costs 25-40% not exactly different from materials in its class, for example, Slate and Clay Tiles. The normal expense to introduce a metal rooftop on a 1,500 sq.ft. farm home is $10,000-13,500. Top makers include McElroy, Fabral, Englert, Classic Metal, Duro-Last, Matterhorn, EDCO.

The majority of metal rooftops are made of steel. Aluminum is the second most utilized metal, that works best in seaside zones, as it’s not powerless to erosion. They can likewise be made of copper and zinc. Be that as it may, this is uncommon because of exceedingly high material expense, about $16-20 for each square foot introduced.

  1. Cedar Shingles and Shakes –

Characteristic wood has an overpowering control bid that numerous mortgage holders love. Cedar shingles and shakes are commonly used on upscale Cape, Victorian, Colonial, Cabin-style and noteworthy homes. Ordinarily, they cost $10,500-14,000 introduced on a basic 1,500 sq.ft. Farm or cape style house. These rooftops last 20-40 years when appropriately thought about, and are a green building material. Also, cedar shake shingle is viewed as an excellent rooftop, in extensive because of its remarkable look. Wood shingles have an increasingly smooth, uniform appearance, and are made by machines. They go in cost from $6 – 7.5 per square foot.

  1. Clay Tile Roof –

Another top of the line material choice, most proper for Mediterranean or Spanish style homes is dirt tile. Establishment cost is around $22,500-30,000 for 1,500 sq.ft.s. Earth is one of the most established and most tough building materials accessible. An appropriately introduced clay tile rooftop will last well more than 100 years. Makers to consider are MCA Tile, Ludowici, and Boral.


Mud rooftops perform exceptionally well in hot atmospheres or seaside zones. These rooftops are entirely tough and can withstand hail, high breezes, and flames. They are not defenseless to dampness, decay, and form, and can remain release free if installed correctly. Check advance is another unmistakable preferred standpoint. Tiles are accessible in various lovely shapes, for example, bent, level/interlocking or fluted. Run of the mill shading decisions are shades of earthenware and patina green.

  1. Slate Roofing –

The ruler of all material items is natural slate. It is the most costly, most solid and longest enduring rooftop. Property holders reports spending around $25,000-40,000 on a 1,600 sq.ft. Slate rooftop. Once introduced, it will cover your home for a long time, and will require insignificant upkeep. No other material can equal the great magnificence of natural slate stone. Slate can withstand any climate conditions and will ensure your home in any atmosphere. Note that the nature of slate tile can fluctuate enormously, influencing its sturdiness, life span, and cost.

Additionally, different hues, for example, Vermont Red, will cost more.

Copyrights © 2019 century-roofing.com. All rights reserved.